/* * Copyright (c) 2022, ArtInChip Technology Co., Ltd * * SPDX-License-Identifier: Apache-2.0 * * Authors: weilin.peng@artinchip.com */ #include #include #include "board.h" struct aic_pinmux { unsigned char func; unsigned char bias; unsigned char drive; char * name; }; struct aic_pinmux aic_pinmux_config[] = { #ifdef AIC_USING_UART0 /* uart0 */ {5, PIN_PULL_DIS, 3, "PA.0"}, {5, PIN_PULL_DIS, 3, "PA.1"}, #endif #ifdef AIC_USING_UART1 /* uart1 */ {5, PIN_PULL_DIS, 3, "PD.2"}, {5, PIN_PULL_DIS, 3, "PD.3"}, #endif #ifdef AIC_USING_UART2 /* uart2 */ {8, PIN_PULL_DIS, 3, "PA.2"}, // BT_UART2_CTS {8, PIN_PULL_DIS, 3, "PA.3"}, // BT_UART2_RTS {5, PIN_PULL_DIS, 3, "PD.4"}, // BT_UART2_TX {5, PIN_PULL_DIS, 3, "PD.5"}, // BT_UART2_RX {1, PIN_PULL_DIS, 3, "PD.6"}, // BT_PWR_ON #endif #ifdef AIC_USING_CAN0 /* can0 */ {4, PIN_PULL_DIS, 3, "PA.4"}, {4, PIN_PULL_DIS, 3, "PA.5"}, #endif #ifdef AIC_USING_RTP {2, PIN_PULL_DIS, 3, "PA.8"}, {2, PIN_PULL_DIS, 3, "PA.9"}, {2, PIN_PULL_DIS, 3, "PA.10"}, {2, PIN_PULL_DIS, 3, "PA.11"}, #endif #ifdef AIC_USING_I2C2 {4, PIN_PULL_DIS, 3, "PA.8"}, // SCK {4, PIN_PULL_DIS, 3, "PA.9"}, // SDA #endif #ifdef AIC_USING_QSPI0 /* qspi0 */ {2, PIN_PULL_DIS, 3, "PB.0"}, {2, PIN_PULL_DIS, 3, "PB.1"}, {2, PIN_PULL_DIS, 3, "PB.2"}, {2, PIN_PULL_DIS, 3, "PB.3"}, {2, PIN_PULL_DIS, 3, "PB.4"}, {2, PIN_PULL_DIS, 3, "PB.5"}, #endif #ifdef AIC_USING_SDMC0 {2, PIN_PULL_UP, 7, "PB.6"}, {2, PIN_PULL_UP, 7, "PB.7"}, {2, PIN_PULL_UP, 7, "PB.8"}, {2, PIN_PULL_UP, 7, "PB.9"}, {2, PIN_PULL_UP, 7, "PB.10"}, {2, PIN_PULL_UP, 7, "PB.11"}, #endif #ifdef AIC_USING_SDMC1 {2, PIN_PULL_UP, 3, "PC.0"}, {2, PIN_PULL_UP, 3, "PC.1"}, {2, PIN_PULL_UP, 3, "PC.2"}, {2, PIN_PULL_UP, 3, "PC.3"}, {2, PIN_PULL_UP, 3, "PC.4"}, {2, PIN_PULL_UP, 3, "PC.5"}, {2, PIN_PULL_UP, 3, "PC.6"}, #endif #ifdef AIC_USING_RTL8733_WLAN0 {1, PIN_PULL_DIS, 3, "PD.7"}, // WIFI_PWR_ON #endif #ifdef AIC_USING_I2C0 {4, PIN_PULL_DIS, 3, "PD.0"}, // SCK {4, PIN_PULL_DIS, 3, "PD.1"}, // SDA #endif #ifdef AIC_PANEL_ENABLE_GPIO {1, PIN_PULL_DIS, 3, AIC_PANEL_ENABLE_GPIO}, #endif #ifdef AIC_LVDS_LINK_0 {3, PIN_PULL_DIS, 3, "PD.18"}, {3, PIN_PULL_DIS, 3, "PD.19"}, {3, PIN_PULL_DIS, 3, "PD.20"}, {3, PIN_PULL_DIS, 3, "PD.21"}, {3, PIN_PULL_DIS, 3, "PD.22"}, {3, PIN_PULL_DIS, 3, "PD.23"}, {3, PIN_PULL_DIS, 3, "PD.24"}, {3, PIN_PULL_DIS, 3, "PD.25"}, {3, PIN_PULL_DIS, 3, "PD.26"}, {3, PIN_PULL_DIS, 3, "PD.27"}, #endif #ifdef AIC_DISP_MIPI_DSI {4, PIN_PULL_DIS, 3, "PD.18"}, {4, PIN_PULL_DIS, 3, "PD.19"}, {4, PIN_PULL_DIS, 3, "PD.20"}, {4, PIN_PULL_DIS, 3, "PD.21"}, {4, PIN_PULL_DIS, 3, "PD.22"}, {4, PIN_PULL_DIS, 3, "PD.23"}, {4, PIN_PULL_DIS, 3, "PD.24"}, {4, PIN_PULL_DIS, 3, "PD.25"}, {4, PIN_PULL_DIS, 3, "PD.26"}, {4, PIN_PULL_DIS, 3, "PD.27"}, #endif #ifdef AIC_USING_GMAC0 /* gmac0 */ {2, PIN_PULL_DIS, 3, "PE.0"}, {2, PIN_PULL_DIS, 3, "PE.1"}, {2, PIN_PULL_DIS, 3, "PE.2"}, {2, PIN_PULL_DIS, 3, "PE.3"}, {2, PIN_PULL_DIS, 3, "PE.4"}, {2, PIN_PULL_DIS, 3, "PE.5"}, {2, PIN_PULL_DIS, 3, "PE.7"}, {2, PIN_PULL_DIS, 3, "PE.8"}, {2, PIN_PULL_DIS, 3, "PE.9"}, /* phy0 reset gpio */ {1, PIN_PULL_DIS, 3, "PE.6"}, /* clk_out2 */ {2, PIN_PULL_DIS, 3, "PE.10"}, #endif #ifdef AIC_USING_PWM1 {3, PIN_PULL_DIS, 3, "PE.11"}, //{3, PIN_PULL_DIS, 3, "PE.12"}, #endif #ifdef AIC_USING_PWM2 {3, PIN_PULL_DIS, 3, "PE.13"}, //{3, PIN_PULL_DIS, 3, "PE.15"}, #endif #if (defined(AIC_USING_USB0_DEVICE) || defined(AIC_USING_USB0_HOST)) /* usb0 */ {2, PIN_PULL_DIS, 3, "PO.0"}, // USB-DM {2, PIN_PULL_DIS, 3, "PO.1"}, // USB-DP {1, PIN_PULL_DIS, 3, "PD.8"}, // USB-ID #endif }; void aic_board_pinmux_init(void) { uint32_t i = 0; long pin = 0; unsigned int g; unsigned int p; for (i=0; i