Files
luban-lite-t3e-pro/target/d13x/demo68-nor/pinmux.c
刘可亮 d2ad584632 V1.0.5
2024-06-28 17:34:51 +08:00

413 lines
11 KiB
C

/*
* Copyright (c) 2022, ArtInChip Technology Co., Ltd
*
* SPDX-License-Identifier: Apache-2.0
*
* Authors: weilin.peng@artinchip.com
*/
#include <aic_core.h>
#include <aic_hal.h>
#include "board.h"
struct aic_pinmux
{
unsigned char func;
unsigned char bias;
unsigned char drive;
char * name;
};
struct aic_pinmux aic_pinmux_config[] = {
#ifdef AIC_USING_UART0
/* uart0 */
{5, PIN_PULL_DIS, 3, "PA.0"},
{5, PIN_PULL_DIS, 3, "PA.1"},
#ifdef AIC_DEV_UART0_MODE_RS485_SIMULATION
{1, PIN_PULL_DIS, 3, AIC_UART0_RTS_NAME},
#endif
#ifdef AIC_DEV_UART0_MODE_RS232_UNAUTO_FLOW_CTRL
#ifdef AIC_UART0_RTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART0_RTS_NAME}, // BT_UART2_RTS
#endif
#ifdef AIC_UART0_CTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART0_CTS_NAME}, // BT_UART2_CTS
#endif
#elif defined AIC_DEV_UART0_MODE_RS232_SW_HW_FLOW_CTRL
#ifdef AIC_UART0_RTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART0_RTS_NAME}, // BT_UART2_RTS
#endif
#ifdef AIC_UART0_CTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART0_CTS_NAME}, // BT_UART2_CTS
#endif
#endif
#endif
#ifdef AIC_USING_UART1
/* uart1 */
{5, PIN_PULL_DIS, 3, "PA.2"},
{5, PIN_PULL_DIS, 3, "PA.3"},
#ifdef AIC_DEV_UART1_MODE_RS485_SIMULATION
{1, PIN_PULL_DIS, 3, AIC_UART1_RTS_NAME},
#endif
#ifdef AIC_DEV_UART1_MODE_RS232_UNAUTO_FLOW_CTRL
#ifdef AIC_UART1_RTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART1_RTS_NAME}, // BT_UART2_RTS
#endif
#ifdef AIC_UART1_CTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART1_CTS_NAME}, // BT_UART2_CTS
#endif
#endif
#ifdef AIC_DEV_UART1_MODE_RS232_SW_HW_FLOW_CTRL
#ifdef AIC_UART1_RTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART1_RTS_NAME}, // BT_UART2_RTS
#endif
#ifdef AIC_UART1_CTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART1_CTS_NAME}, // BT_UART2_CTS
#endif
#endif
#endif
#ifdef AIC_USING_UART2
/* uart2 */
{5, PIN_PULL_DIS, 3, "PD.4"}, // BT_UART2_TX
{5, PIN_PULL_DIS, 3, "PD.5"}, // BT_UART2_RX
#ifdef AIC_DEV_UART2_MODE_RS485_SIMULATION
{1, PIN_PULL_DIS, 3, AIC_UART2_RTS_NAME},
#elif defined AIC_DEV_UART2_MODE_RS232_UNAUTO_FLOW_CTRL
#ifdef AIC_UART2_RTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART2_RTS_NAME}, // BT_UART2_RTS
#endif
#ifdef AIC_UART2_CTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART2_CTS_NAME}, // BT_UART2_CTS
#endif
#elif defined AIC_DEV_UART2_MODE_RS232_SW_HW_FLOW_CTRL
#ifdef AIC_UART2_RTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART2_RTS_NAME}, // BT_UART2_RTS
#endif
#ifdef AIC_UART2_CTS_ENABLE
{1, PIN_PULL_DIS, 3, AIC_UART2_CTS_NAME}, // BT_UART2_CTS
#endif
#else
{8, PIN_PULL_DIS, 3, "PA.2"}, // BT_UART2_CTS
{8, PIN_PULL_DIS, 3, "PA.3"}, // BT_UART2_RTS
{1, PIN_PULL_DIS, 3, "PD.6"}, // BT_PWR_ON
#endif
#endif
#ifdef AIC_USING_CAN0
/* can0 */
{4, PIN_PULL_DIS, 3, "PA.4"},
{4, PIN_PULL_DIS, 3, "PA.5"},
#endif
#ifdef AIC_USING_AUDIO
#ifdef AIC_AUDIO_DMIC
{4, PIN_PULL_DIS, 3, "PD.16"},
{4, PIN_PULL_DIS, 3, "PD.17"},
#endif
#ifdef AIC_AUDIO_PLAYBACK
{5, PIN_PULL_DIS, 3, "PE.12"},
{1, PIN_PULL_DIS, 3, AIC_AUDIO_PA_ENABLE_GPIO},
#endif
#endif
#ifdef AIC_USING_I2S0
{4, PIN_PULL_DIS, 3, "PD.11"},
{4, PIN_PULL_DIS, 3, "PD.12"},
{4, PIN_PULL_DIS, 3, "PD.13"},
{4, PIN_PULL_DIS, 3, "PD.14"},
{4, PIN_PULL_DIS, 3, "PD.15"},
#endif
#ifdef AIC_USING_RTP
{2, PIN_PULL_DIS, 3, "PA.8"},
{2, PIN_PULL_DIS, 3, "PA.9"},
{2, PIN_PULL_DIS, 3, "PA.10"},
{2, PIN_PULL_DIS, 3, "PA.11"},
#endif
#ifdef AIC_USING_I2C2
{4, PIN_PULL_DIS, 3, "PA.8"}, // SCK
{4, PIN_PULL_DIS, 3, "PA.9"}, // SDA
#endif
#if defined(AIC_USING_QSPI0) && !defined(AIC_SYSCFG_SIP_FLASH_ENABLE)
/* qspi0 */
{2, PIN_PULL_DIS, 3, "PB.0"},
{2, PIN_PULL_DIS, 3, "PB.1"},
{2, PIN_PULL_DIS, 3, "PB.2"},
{2, PIN_PULL_DIS, 3, "PB.3"},
{2, PIN_PULL_DIS, 3, "PB.4"},
{2, PIN_PULL_DIS, 3, "PB.5"},
#endif
#ifdef AIC_USING_SDMC0
{2, PIN_PULL_UP, 7, "PB.6"},
{2, PIN_PULL_UP, 7, "PB.7"},
{2, PIN_PULL_UP, 7, "PB.8"},
{2, PIN_PULL_UP, 7, "PB.9"},
{2, PIN_PULL_UP, 7, "PB.10"},
{2, PIN_PULL_UP, 7, "PB.11"},
#endif
#ifdef AIC_USING_SDMC1
{2, PIN_PULL_UP, 3, "PC.0"},
{2, PIN_PULL_UP, 3, "PC.1"},
{2, PIN_PULL_UP, 3, "PC.2"},
{2, PIN_PULL_UP, 3, "PC.3"},
{2, PIN_PULL_UP, 3, "PC.4"},
{2, PIN_PULL_UP, 3, "PC.5"},
{2, PIN_PULL_UP, 3, "PC.6"},
#endif
#ifdef AIC_USING_CAP0
{3, PIN_PULL_UP, 3, "PC.6"},
#endif
#ifdef AIC_USING_CAP1
{3, PIN_PULL_UP, 3, "PC.7"},
#endif
#ifdef AIC_USING_CAP2
{3, PIN_PULL_UP, 3, "PC.8"},
#endif
#ifdef AIC_USING_CAP3
{3, PIN_PULL_UP, 3, "PC.9"},
#endif
#ifdef AIC_USING_CAP4
{3, PIN_PULL_UP, 3, "PC.10"},
#endif
#ifdef AIC_USING_CAP5
{3, PIN_PULL_UP, 3, "PC.11"},
#endif
#ifdef AIC_WIRELESS_LAN
{1, PIN_PULL_DIS, 3, "PD.7"}, // WIFI_PWR_ON
#endif
#ifdef AIC_USING_I2C0
{4, PIN_PULL_DIS, 3, "PD.0"}, // SCK
{4, PIN_PULL_DIS, 3, "PD.1"}, // SDA
#endif
#ifdef AIC_PANEL_ENABLE_GPIO
{1, PIN_PULL_DIS, 3, AIC_PANEL_ENABLE_GPIO},
#endif
#ifdef AIC_LVDS_LINK_0
{3, PIN_PULL_DIS, 3, "PD.18"},
{3, PIN_PULL_DIS, 3, "PD.19"},
{3, PIN_PULL_DIS, 3, "PD.20"},
{3, PIN_PULL_DIS, 3, "PD.21"},
{3, PIN_PULL_DIS, 3, "PD.22"},
{3, PIN_PULL_DIS, 3, "PD.23"},
{3, PIN_PULL_DIS, 3, "PD.24"},
{3, PIN_PULL_DIS, 3, "PD.25"},
{3, PIN_PULL_DIS, 3, "PD.26"},
{3, PIN_PULL_DIS, 3, "PD.27"},
#endif
#ifdef AIC_DISP_MIPI_DSI
{4, PIN_PULL_DIS, 3, "PD.18"},
{4, PIN_PULL_DIS, 3, "PD.19"},
{4, PIN_PULL_DIS, 3, "PD.20"},
{4, PIN_PULL_DIS, 3, "PD.21"},
{4, PIN_PULL_DIS, 3, "PD.22"},
{4, PIN_PULL_DIS, 3, "PD.23"},
{4, PIN_PULL_DIS, 3, "PD.24"},
{4, PIN_PULL_DIS, 3, "PD.25"},
{4, PIN_PULL_DIS, 3, "PD.26"},
{4, PIN_PULL_DIS, 3, "PD.27"},
#endif
#ifdef AIC_USING_GMAC0
/* gmac0 */
{2, PIN_PULL_DIS, 3, "PE.0"},
{2, PIN_PULL_DIS, 3, "PE.1"},
{2, PIN_PULL_DIS, 3, "PE.2"},
{2, PIN_PULL_DIS, 3, "PE.3"},
{2, PIN_PULL_DIS, 3, "PE.4"},
{2, PIN_PULL_DIS, 3, "PE.5"},
{2, PIN_PULL_DIS, 3, "PE.7"},
{2, PIN_PULL_DIS, 3, "PE.8"},
{2, PIN_PULL_DIS, 3, "PE.9"},
/* phy0 reset gpio */
{1, PIN_PULL_DIS, 3, "PE.6"},
#endif
#ifdef AIC_USING_CLK_OUT0
{6, PIN_PULL_DIS, 3, "PD.13"},
#endif
#ifdef AIC_USING_CLK_OUT1
{2, PIN_PULL_DIS, 3, "PE.11"},
#endif
#ifdef AIC_USING_CLK_OUT2
{2, PIN_PULL_DIS, 3, "PE.10"},
#endif
#ifdef AIC_USING_CLK_OUT3
{7, PIN_PULL_DIS, 3, "PC.6"},
#endif
#ifdef AIC_USING_PWM1
{3, PIN_PULL_DIS, 3, "PE.11"},
//{3, PIN_PULL_DIS, 3, "PE.12"},
#endif
#ifdef AIC_USING_PWM2
{3, PIN_PULL_DIS, 3, "PE.13"},
//{3, PIN_PULL_DIS, 3, "PE.15"},
#endif
#ifdef AIC_USING_EPWM0
{7, PIN_PULL_DIS, 3, "PD.26"},
{7, PIN_PULL_DIS, 3, "PD.27"},
#endif
#ifdef AIC_USING_EPWM1
{7, PIN_PULL_DIS, 3, "PD.24"},
{7, PIN_PULL_DIS, 3, "PD.25"},
#endif
#ifdef AIC_USING_EPWM2
{7, PIN_PULL_DIS, 3, "PD.22"},
{7, PIN_PULL_DIS, 3, "PD.23"},
#endif
#ifdef AIC_USING_EPWM3
{7, PIN_PULL_DIS, 3, "PD.20"},
{7, PIN_PULL_DIS, 3, "PD.21"},
#endif
#ifdef AIC_USING_EPWM4
{7, PIN_PULL_DIS, 3, "PD.18"},
{7, PIN_PULL_DIS, 3, "PD.19"},
#endif
#ifdef AIC_USING_EPWM5
{7, PIN_PULL_DIS, 3, "PD.16"},
{7, PIN_PULL_DIS, 3, "PD.17"},
#endif
#ifdef AIC_USING_EPWM6
{7, PIN_PULL_DIS, 3, "PD.14"},
{7, PIN_PULL_DIS, 3, "PD.15"},
#endif
#ifdef AIC_USING_EPWM7
{7, PIN_PULL_DIS, 3, "PD.12"},
{7, PIN_PULL_DIS, 3, "PD.13"},
#endif
#ifdef AIC_USING_EPWM8
{7, PIN_PULL_DIS, 3, "PD.10"},
{7, PIN_PULL_DIS, 3, "PD.11"},
#endif
#ifdef AIC_USING_EPWM9
{7, PIN_PULL_DIS, 3, "PD.8"},
{7, PIN_PULL_DIS, 3, "PD.9"},
#endif
#ifdef AIC_USING_EPWM10
{7, PIN_PULL_DIS, 3, "PD.2"},
{7, PIN_PULL_DIS, 3, "PD.3"},
#endif
#ifdef AIC_USING_EPWM11
{7, PIN_PULL_DIS, 3, "PD.0"},
{7, PIN_PULL_DIS, 3, "PD.1"},
#endif
#if (defined(AIC_USING_USB0_DEVICE) || defined(AIC_USING_USB0_HOST))
/* usb0 */
{2, PIN_PULL_DIS, 3, "PO.0"}, // USB-DM
{2, PIN_PULL_DIS, 3, "PO.1"}, // USB-DP
{1, PIN_PULL_DIS, 3, "PD.8"}, // USB-ID
#endif
#ifdef AIC_USING_PSADC0
{7, PIN_PULL_DIS, 3, "PA.0"},
#endif
#ifdef AIC_USING_PSADC1
{7, PIN_PULL_DIS, 3, "PA.1"},
#endif
#ifdef AIC_USING_PSADC2
{7, PIN_PULL_DIS, 3, "PA.2"},
#endif
#ifdef AIC_USING_PSADC3
{7, PIN_PULL_DIS, 3, "PA.3"},
#endif
#ifdef AIC_USING_PSADC4
{7, PIN_PULL_DIS, 3, "PA.4"},
#endif
#ifdef AIC_USING_PSADC5
{7, PIN_PULL_DIS, 3, "PA.5"},
#endif
#ifdef AIC_USING_PSADC6
{7, PIN_PULL_DIS, 3, "PA.6"},
#endif
#ifdef AIC_USING_PSADC7
{7, PIN_PULL_DIS, 3, "PA.7"},
#endif
#ifdef AIC_USING_PSADC8
{7, PIN_PULL_DIS, 3, "PA.8"},
#endif
#ifdef AIC_USING_PSADC9
{7, PIN_PULL_DIS, 3, "PA.9"},
#endif
#ifdef AIC_USING_PSADC10
{7, PIN_PULL_DIS, 3, "PA.10"},
#endif
#ifdef AIC_USING_PSADC11
{7, PIN_PULL_DIS, 3, "PA.11"},
#endif
#ifdef AIC_USING_PSADC12
{7, PIN_PULL_DIS, 3, "PA.12"},
#endif
#ifdef AIC_USING_PSADC13
{7, PIN_PULL_DIS, 3, "PA.13"},
#endif
#ifdef AIC_USING_PSADC14
{7, PIN_PULL_DIS, 3, "PA.14"},
#endif
#ifdef AIC_USING_PSADC15
{7, PIN_PULL_DIS, 3, "PA.15"},
#endif
#ifdef AIC_USING_GPAI0
{2, PIN_PULL_DIS, 3, "PA.0"},
#endif
#ifdef AIC_USING_GPAI1
{2, PIN_PULL_DIS, 3, "PA.1"},
#endif
#ifdef AIC_USING_GPAI2
{2, PIN_PULL_DIS, 3, "PA.2"},
#endif
#ifdef AIC_USING_GPAI3
{2, PIN_PULL_DIS, 3, "PA.3"},
#endif
#ifdef AIC_USING_GPAI4
{2, PIN_PULL_DIS, 3, "PA.4"},
#endif
#ifdef AIC_USING_GPAI5
{2, PIN_PULL_DIS, 3, "PA.5"},
#endif
#ifdef AIC_USING_GPAI6
{2, PIN_PULL_DIS, 3, "PA.6"},
#endif
#ifdef AIC_USING_GPAI7
{2, PIN_PULL_DIS, 3, "PA.7"},
#endif
/* ctp rst & irq */
#ifdef AIC_TOUCH_PANEL_AXS15260
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_AXS15260_RST_PIN},
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_AXS15260_INT_PIN},
#endif
#ifdef AIC_TOUCH_PANEL_CST3240
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_CST3240_RST_PIN},
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_CST3240_INT_PIN},
#endif
#ifdef AIC_TOUCH_PANEL_FT7411
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_FT7411_RST_PIN},
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_FT7411_INT_PIN},
#endif
#ifdef AIC_TOUCH_PANEL_GSL1680
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_GSL1680_RST_PIN},
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_GSL1680_INT_PIN},
#endif
#ifdef AIC_TOUCH_PANEL_GT911
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_GT911_RST_PIN},
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_GT911_INT_PIN},
#endif
#ifdef AIC_TOUCH_PANEL_ST16XX
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_ST16XX_RST_PIN},
{1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_ST16XX_INT_PIN},
#endif
};
void aic_board_pinmux_init(void)
{
uint32_t i = 0;
long pin = 0;
unsigned int g;
unsigned int p;
for (i=0; i<ARRAY_SIZE(aic_pinmux_config); i++) {
pin = hal_gpio_name2pin(aic_pinmux_config[i].name);
if (pin < 0)
continue;
g = GPIO_GROUP(pin);
p = GPIO_GROUP_PIN(pin);
hal_gpio_set_func(g, p, aic_pinmux_config[i].func);
hal_gpio_set_bias_pull(g, p, aic_pinmux_config[i].bias);
hal_gpio_set_drive_strength(g, p, aic_pinmux_config[i].drive);
}
}